Reactor A-XP1

SKU: 24Y164
Regular price $19,070.00

The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the job site. It maintains consistent temperature control, even when you're spraying at maximum flow rates – resulting in better-quality coating.

For polyurea coatings – applies up to 1.5 gal (5.7 L) per minute.

  • Three Heat Zones

    • Three independent heat zones – ISO, resin and hose heat
    • Provide accurate heat control for reliable spraying to handle different chemical viscosities
    • Digital temperature controls
  • Quick Knockdown Pumps

    • Allows for easy service
    • Fast disassembly
  • NXT Air Motor

    • Low air consumption for increased efficiency
    • Muffler provides low operating noise levels
    • Air valve provides smooth and rapid changeover
  • ISO Pump Lube System

    • Prevents isocyanate crystallization on the pump seal and shaft
  • Best choice for affordability and durability

  • Easy to operate and maintain

  • Maintains temperature setpoints for better yield
  • Maintains consistent output pressure for uniform spray pattern

  • Easy to operate and maintain

Technical Specifications

AIR INLET SIZE (CM) 1.27
AIR INLET SIZE (IN) 1/2
AIR INLET SIZE (MM) 12.7
AIR INLET THREAD GENDER Female
AIR INLET THREAD TYPE NPT
AMPERAGE (A) 26 @ 380 V ac (3-Phase WYE), 45 @ 230 V ac (3-Phase Delta), 56 @ 230 V ac (1-Phase)
APPLICATION Protective Coatings
APPLICATOR TYPE Manual
COMPATIBLE MATERIAL Plural Components
COMPONENT A INLET SIZE (IN) 3/4
COMPONENT A INLET SIZE (MM) 19.05
COMPONENT A THREAD GENDER Female
COMPONENT A THREAD TYPE NPT
COMPONENT B INLET SIZE (IN) 3/4
COMPONENT B INLET SIZE (MM) 19.05
COMPONENT B THREAD GENDER Female
COMPONENT B THREAD TYPE NPT
COMPONENT TYPE Two Component
FLUSH TYPE Solvent
FREQUENCY (HZ) 50/60
MATERIAL APPLICATION Polyurea, Poliurea
MAXIMUM AIR CONSUMPTION (SCFM) 32 scfm at 2000 psi
MAXIMUM AIR INLET PRESSURE (BAR) 8.62
MAXIMUM AIR INLET PRESSURE (KPA) 862
MAXIMUM AIR INLET PRESSURE (PSI) 125
MAXIMUM FLOW RATE (CC/MIN) 5680
MAXIMUM FLOW RATE (GPM) 1.5
MAXIMUM FLOW RATE (L/MIN) 5.68
MAXIMUM FLUID TEMPERATURE (°C) 88
MAXIMUM FLUID TEMPERATURE (°F) 190
MAXIMUM FLUID VISCOSITY (CP) 1500
MAXIMUM HOSE LENGTH (FT) 210
MAXIMUM HOSE LENGTH (M) 64
MAXIMUM MIX RATIO 1:1
MAXIMUM WORKING PRESSURE (BAR) 241
MAXIMUM WORKING PRESSURE (KPA) 24100
MAXIMUM WORKING PRESSURE (MPA) 24
MAXIMUM WORKING PRESSURE (PSI) 3500
MINIMUM FLUID VISCOSITY (CP) 250
OVERALL DEPTH (CM) 62.2
OVERALL DEPTH (IN) 24.5
OVERALL DEPTH (MM) 622
OVERALL HEIGHT (CM) 110.5
OVERALL HEIGHT (IN) 43.5
OVERALL HEIGHT (MM) 1105
OVERALL WIDTH (CM) 54.6
OVERALL WIDTH (IN) 21.5
OVERALL WIDTH (MM) 546
PHASE 1, 3
POWER RATING (HP) 17.43
POWER RATING (KW) 13
POWER RATING (W) 13000
POWER SOURCE Air
PRESSURE TYPE High Pressure
PRODUCT TYPE Plural Component
SOUND POWER LEVEL (DB(A)) 80.1
SOUND PRESSURE LEVEL (DB(A)) 70.2
TYPE Proportioning System
WEIGHT (KG) 140.6
WEIGHT (LB) 310
WETTED MATERIAL Carbon Steel, Stainless Steel, Chrome, Aluminum, Fluoroelastomer, PTFE, Nylon
MODEL Reactor
SERIES A-XP1