The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the job site. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.
- Maintains temperature setpoints for better yield
- Maintains consistent output pressure for uniform spray pattern
- Easy-to-service fluid section reduces maintenance and increases productivity
- Best choice for affordability and durability
-
DataTrak Control
- Resettable counter tracks material usage
-
Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
-
Recirculation Manifold
- A quick, easy way to balance system pressures
-
NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
-
Quick Knockdown Lower Pumps
- For easy disassembly and maintenance
-
ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
Technical Specifications
| AIR INLET SIZE (CM) | 1.27 |
|---|---|
| AIR INLET SIZE (IN) | 1/2 |
| AIR INLET SIZE (MM) | 12.7 |
| AIR INLET THREAD GENDER | Female |
| AIR INLET THREAD TYPE | NPT |
| AMPERAGE (A) | 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase) |
| APPLICATION | Spray Foam |
| APPLICATOR TYPE | Manual |
| COMPATIBLE MATERIAL | Plural Components |
| COMPONENT A INLET SIZE (IN) | 3/4 |
| COMPONENT A INLET SIZE (MM) | 19.05 |
| COMPONENT A THREAD GENDER | Female |
| COMPONENT A THREAD TYPE | NPT |
| COMPONENT B INLET SIZE (IN) | 3/4 |
| COMPONENT B INLET SIZE (MM) | 19.05 |
| COMPONENT B THREAD GENDER | Female |
| COMPONENT B THREAD TYPE | NPT |
| COMPONENT TYPE | Two Component |
| FLUSH TYPE | Solvent |
| FREQUENCY (HZ) | 50/60 |
| GUN TYPE | As selected in package |
| BARE UNIT INCLUDES | Proportioner, Dosificador, Heated Hose, Wheels, DataTrak |
| MATERIAL APPLICATION | Polyurethane Foam, Espuma de poliuretano |
| MAXIMUM AIR CONSUMPTION (SCFM) | 28 scfm at 1500 psi |
| MAXIMUM AIR INLET PRESSURE (BAR) | 8.62 |
| MAXIMUM AIR INLET PRESSURE (KPA) | 862 |
| MAXIMUM AIR INLET PRESSURE (PSI) | 125 |
| MAXIMUM FLOW RATE (KG/MIN) | 11.34 |
| MAXIMUM FLOW RATE (LB/MIN) | 25 |
| MAXIMUM FLUID TEMPERATURE (°C) | 88 |
| MAXIMUM FLUID TEMPERATURE (°F) | 190 |
| MAXIMUM FLUID VISCOSITY (CP) | 1500 |
| MAXIMUM HOSE LENGTH (FT) | 210 |
| MAXIMUM HOSE LENGTH (M) | 64 |
| MAXIMUM MIX RATIO | 1:1 |
| MAXIMUM WORKING PRESSURE (BAR) | 138 |
| MAXIMUM WORKING PRESSURE (KPA) | 13800 |
| MAXIMUM WORKING PRESSURE (MPA) | 13.8 |
| MAXIMUM WORKING PRESSURE (PSI) | 2000 |
| MINIMUM FLUID VISCOSITY (CP) | 250 |
| OVERALL DEPTH (CM) | 76.2 |
| OVERALL DEPTH (IN) | 30 |
| OVERALL DEPTH (MM) | 762 |
| OVERALL HEIGHT (CM) | 110.5 |
| OVERALL HEIGHT (IN) | 43.5 |
| OVERALL HEIGHT (MM) | 1105 |
| OVERALL WIDTH (CM) | 73.7 |
| OVERALL WIDTH (IN) | 29 |
| OVERALL WIDTH (MM) | 737 |
| PHASE | 1, 3 |
| POWER RATING (HP) | 12.07 |
| POWER RATING (KW) | 9 |
| POWER RATING (W) | 9000 |
| POWER SOURCE | Air |
| PRESSURE TYPE | Low Pressure |
| PRODUCT TYPE | Plural Component |
| SOUND POWER LEVEL (DB(A)) | 80.1 |
| SOUND PRESSURE LEVEL (DB(A)) | 70.2 |
| TYPE | Proportioner Package |
| WEIGHT (KG) | 140.6 |
| WEIGHT (LB) | 310 |
| WETTED MATERIAL | Carbon Steel, Stainless Steel, Chrome, Aluminum, Fluoroelastomer, PTFE, Nylon |
| MAXIMUM AIR INLET PRESSURE (MPA) | 0.86 |
| MODEL | Reactor |
| SERIES | A-25 |
| SYSTEM_INCLUDES | DataTrak and Wheels |
| VOLTAGE (V) | 230, 400 |